lempka_pulling
New member
- Joined
- Jul 21, 2015
- Messages
- 8
Has anyone found a place that sells a 1550 billet yoke for a 20-145. Thanks
Has anyone found a place that sells a 1550 billet yoke for a 20-145. Thanks
After haisleys sent me one for a sqhd called back and they don't have one for a 20-145. Called performance pros and they claim nobody has yet made one for a 20-145
After haisleys sent me one for a sqhd called back and they don't have one for a 20-145. Called performance pros and they claim nobody has yet made one for a 20-145
Here is the spicer number for the cast one if u need it. Spicer#4-4-7571-1X
Have y'all been breaking the cast 1550 yokes?
I called Mark Petros at Greensburg Machine and Drivelkne to order my 1550 yoke for mine, he advised me not to run a 1550 on mine and to jump up to a 1610 joint because the 1550 has a smaller diameter spline on the telescoping portion of the shaft and apparently that becomes the weak link on higher horsepower trucks on decent tracks. I would have bet that 1550 would be plenty enough for my 3.0 SB setup and the ****ty tracks we have in NE but Mark highly encouraged me to go with the bigger joints once and be done with it so I’ll trust his opinion. Just thought I’d pass along the info I was given...
That was my thought as well, I bought my profab box used off of a 3.6 truck and it already had the 1550 yoke on it. Mark brought up an interesting point that about the splined portion of the shaft but I just can’t see myself breaking one....
1480's all around here