mxhunter147
Gear Head
- Joined
- Apr 4, 2011
- Messages
- 187
I am selling my 2006 Dodge Cummins 2500 4x4 Street/Race truck. This truck is fully built and can be driven on the street or taken to the track and run 10s.
This truck has made 1113 hp & 2000ft/lb on DC Chassis dyno in Indianapolis. It has also went 10.58 @ 129 mph on terra grappler tires.
The truck itself has 92,000 miles, and only 2500 on the engine and about 20 on a fresh transmission. The engine was built by Midwest Truck Products. All the kinks have been worked out on this truck, it's just turn key fun now.
Mods:
Engine-
-Fully balanced rotating assembly
-.20 over, cut & coated Cummins marine pistons
-Polished 12v rods, arp rod bolts
-14mm main studs
-Fluidampr
-Full Port & Polish head w/ Joker fab side draft
-Hamilton 188/220 Cam
-Dual valve springs
-Arp 625s
-Dual O-Rings (Head & Block)
-Fleece Coolant Bypass
-Exergy 150% over injectors (4k miles)
-ED 66/480 twins (4k miles)
-Steed Speed T4 w gate
-Turbosmart 45hp wastegate
-New ATS dual Cp3 kit
- (1) 4k mile lbz pump,
- (1) Exergy Stroker 6.7 cp3 (2k miles)
-(2) Airdog 150s running into Hellmann fuel block with all custom braided AN lines under hood, 1/2" return line to tank.
-Flex-a-lite Electric Fan
-Snow water meth kit
-Isspro: Fuel psi, Rail psi, Egt, Trans temp
-Autometer: Boost gauges and drive psi
Transmission-
-Fresh 48re transmission
-Dpc triple disc converter - 3fp stall
-Billet Flexplate
-Tcs aermet input
-Billet intermediate and output
-All the billet misc. parts
-PCS Standalone controller w Suncoast valve body. Fully tunable
-Mag-Hytec Double Deep Pan
-Factory trans cooler up front, two coolers with fan mounted in bed.
Suspension-
-Blocks removed from rear
-Rancho 9000 adjustable shocks (New)
-Caltracs (New)
Exterior-
-Paint matched sport front end
-Roll pan in rear
-20x10 Hostile Havocs
-305/50/20 Nitto 420s (New)
-7" Bed stack, 5" exhaust- V bands on exhaust
- The truck has a tig welded Chromoly rollcage built by Garrett Race cars. It is good for up to 8.50 in the 1/4. The back seat is still usable with this cage.
Text or call me with any questions at 573-579-6147
$42,000
This truck has made 1113 hp & 2000ft/lb on DC Chassis dyno in Indianapolis. It has also went 10.58 @ 129 mph on terra grappler tires.
The truck itself has 92,000 miles, and only 2500 on the engine and about 20 on a fresh transmission. The engine was built by Midwest Truck Products. All the kinks have been worked out on this truck, it's just turn key fun now.
Mods:
Engine-
-Fully balanced rotating assembly
-.20 over, cut & coated Cummins marine pistons
-Polished 12v rods, arp rod bolts
-14mm main studs
-Fluidampr
-Full Port & Polish head w/ Joker fab side draft
-Hamilton 188/220 Cam
-Dual valve springs
-Arp 625s
-Dual O-Rings (Head & Block)
-Fleece Coolant Bypass
-Exergy 150% over injectors (4k miles)
-ED 66/480 twins (4k miles)
-Steed Speed T4 w gate
-Turbosmart 45hp wastegate
-New ATS dual Cp3 kit
- (1) 4k mile lbz pump,
- (1) Exergy Stroker 6.7 cp3 (2k miles)
-(2) Airdog 150s running into Hellmann fuel block with all custom braided AN lines under hood, 1/2" return line to tank.
-Flex-a-lite Electric Fan
-Snow water meth kit
-Isspro: Fuel psi, Rail psi, Egt, Trans temp
-Autometer: Boost gauges and drive psi
Transmission-
-Fresh 48re transmission
-Dpc triple disc converter - 3fp stall
-Billet Flexplate
-Tcs aermet input
-Billet intermediate and output
-All the billet misc. parts
-PCS Standalone controller w Suncoast valve body. Fully tunable
-Mag-Hytec Double Deep Pan
-Factory trans cooler up front, two coolers with fan mounted in bed.
Suspension-
-Blocks removed from rear
-Rancho 9000 adjustable shocks (New)
-Caltracs (New)
Exterior-
-Paint matched sport front end
-Roll pan in rear
-20x10 Hostile Havocs
-305/50/20 Nitto 420s (New)
-7" Bed stack, 5" exhaust- V bands on exhaust
- The truck has a tig welded Chromoly rollcage built by Garrett Race cars. It is good for up to 8.50 in the 1/4. The back seat is still usable with this cage.
Text or call me with any questions at 573-579-6147
$42,000
Attachments
Last edited:
