DMAXchris
sleeper worktruck
- Joined
- Jan 3, 2009
- Messages
- 118
Im selling my 2006 LBZ W/T with a buit motor, trans and lots of other upgrades. Its a bare bones worktruck, no power anything, rubber floor. The truck has 155xxx on it and the motor has 30k. All work was done by Caleb at Blackout Performance. The truck has gone 11.7s on th stock CP3 and is currently making around 700rwhp. Never had it on a dyno for exact numbers though. I dont have time to play with it anymore and would like to see it go to someone that woukd make use of the built motor. It has an s475 & 45% injectors and I drive it daily. Current tune is a single by Rob and runs 11.8s on A/Ts. Its in fairly good shape with normal rust on the frame. The rockers need done, but i might have them fixed before it sells. The bed is kind of ****ty on the inside because I've used it as a worktruck for 7 years. Has dents, dings and 2 holes; one from the stacks and one from the previous owner hacking a G/N install. Nothng a bedrug wont cover up. It is lowered a bit, but the stock shackles will be included. It has a touch screen Pioneer with diamond audio fronts and pioneer rears. 2 12" JL Audio subs and a JL 500w mono amp under the rear seat. It will come with an extra set of factory wheels with Toyo Proxes. All reciepts and pics are available to serious buyers. I'm starting another business and would like it gone before spring, so make an offer!
Asking 27,500 obo
Motor:
Carrillo rods, Mahle race cast .040 16.8:1 with vavle reliefs, Hamilton 2.6 cam, Hamilton springs, fully blueprinted and balanced, head studs, main studs
Trans: PPE stage 5 with other tricks, Suncoast 1058 The converter is new and onoy has about 15 passes on it. The trans was re-done in the summer of 2013 and has about 10k on it.
Turbo: Bullseye billet s475/87/.9 ProFab pedestal, manifolds, up pipes ATS downpipe
Fuel: stock cp3, 45% nozzles, AirDog 200gph
Other: Recon Tails & 3rd brake, PowerSlot Rotors, Hawk Superduty pads, Russell SS lines, BT Dieselworks TCC lockup box, Autometer Boost & Pyro, AeroForce ScanGauge, trailer brake controller
7two4-8zero9-95zero1 or Pm me
Asking 27,500 obo
Motor:
Carrillo rods, Mahle race cast .040 16.8:1 with vavle reliefs, Hamilton 2.6 cam, Hamilton springs, fully blueprinted and balanced, head studs, main studs
Trans: PPE stage 5 with other tricks, Suncoast 1058 The converter is new and onoy has about 15 passes on it. The trans was re-done in the summer of 2013 and has about 10k on it.
Turbo: Bullseye billet s475/87/.9 ProFab pedestal, manifolds, up pipes ATS downpipe
Fuel: stock cp3, 45% nozzles, AirDog 200gph
Other: Recon Tails & 3rd brake, PowerSlot Rotors, Hawk Superduty pads, Russell SS lines, BT Dieselworks TCC lockup box, Autometer Boost & Pyro, AeroForce ScanGauge, trailer brake controller
7two4-8zero9-95zero1 or Pm me
