SCHMITTY
Not enough time
- Joined
- Jun 20, 2012
- Messages
- 1,188
Just finished assembling a basket case 48re for a guy. He had the truck towed from another shop that he had a falling out with. Anyways the batteries were low for a couple months but they seem to be holding a charge. I’m not getting any power to the signal wire for the starter no codes either.
I’ve been moving the gear selector back and forth while holding the key in the crank position but not even 1 click from the starter. There is a large ground that was broken off by somebody previously. I put a jumper wire with an alligator clip on it to a clean spot on the frame still nothing. The truck has efi live, I checked the plugs at the back of the engine and they are all plugged in tight. Direction towards the next things to check would be awesome
I’ve been moving the gear selector back and forth while holding the key in the crank position but not even 1 click from the starter. There is a large ground that was broken off by somebody previously. I put a jumper wire with an alligator clip on it to a clean spot on the frame still nothing. The truck has efi live, I checked the plugs at the back of the engine and they are all plugged in tight. Direction towards the next things to check would be awesome