271 upgrade

[smokn3500]

Done the search and can't find a solid answer. Putting a 271 transfer case in my 2nd gen puller. Want to know where to get 1410 front drive shafts yoke for the transfer case. Doing away with flat flange style. Some say it uses the same for 241dhd. But I don't know. Anyone have any experience with this?

 

[MufflerBearing]

call mark @ Greensburg machine - 724-219-0450. Tell him what your doing and you will have everything in a day or two.

 

[01 HO]

^^^ Yeah what he said.

 

[kleann]

http://competitiondiesel.com/forums/showthread.php?t=166929&highlight=1410

Also; The yoke for the d60 is the same for the d70 iirc

 

[bigstacks95]

I believe both the 271 and the 241 have 32 spline front outputs, therefore they'd be the same. Not sure about the seal though, I do know that the 1410 yoke takes a different seal from the flange on a 241.

Should be a Spicer 3-4-10951-1