4 gsk problems

[cetaneaddict]

I installed a pacbrake 4,000 gsk in last night and 60 lb valve springs. The motor will rev to 4,000 no problem with no load. With load only revs 2,800. What did I do wrong or am I missing ?

 

[cetaneaddict]

Also I checked the fuel shut off. No binding

 

[BRE]

How did you set them??

 

[ChuMaDD]

Are you 100% sure you got all the shims?

 

[cetaneaddict]

All shims are out. I went two clicks and it turned 3,300 n runs like a raped ape. I went one more n it fell on its face. What rpms should I see with the 4 gsk ?

 

[CTDYoungGun]

Be sure you run the high idle stop screw in or you won't get beyond 33-3400 rpm under load

 

[madmikeismad]

Be sure you run the high idle stop screw in or you won't get beyond 33-3400 rpm under load

What is the high idle stop screw? Never heard of it.

Sent from my DROID3 using Tapatalk 2

 

[BRE]

I took mine out.

 

[cetaneaddict]

What n where is the high idle stop screw?

 

[BRE]

Let me google this for you!

* this sized terribly

 

[cetaneaddict]

Thanks ill give it a shot

 

[cetaneaddict]

I tried that still no more rpms. Should I back off a click ?

 

[madmikeismad]

Idle and revs and everything are smooth all the way through the rpm range?

 

[BRE]

Possible timing issue?

 

[Olee Poole]

Check your fuel psi..

 

[ahale2772]

I had to go 6 clicks on mine to get it to run like I want

thats the first soft click (barely noticable) then 6 more

 

[Olee Poole]

I had to go 6 clicks on mine to get it to run like I want

thats the first soft click (barely noticable) then 6 more

^^ Would it start with out touching the pedal?? also how long did you have to crank on it till it fired?

Thanks!

 

[ahale2772]

When it was at 4 clicks (five if you include the soft click) it had no mid-rpm balls

Started perfect both times, going to 6 clicks brought the idle rpm up 50-75 rpm

 

[Olee Poole]

When it was at 4 clicks (five if you include the soft click) it had no mid-rpm balls

Started perfect both times, going to 6 clicks brought the idle rpm up 50-75 rpm

Your running PAC 4k kit also?

 

[YOUNG GUNS15]

I had to go 6 clicks on mine to get it to run like I want

thats the first soft click (barely noticable) then 6 more

This is how I ran my 4ks. I haven't got my 5k springs to run like my old springs yet. It was nice cause the truck would drive itself with hardly any throttle input. I think that also cut my smoke way back since I was barely adding any fuel to get moving.