4 gsk problems

^exactly, I wouldnt run it on a standard truck, but its ok on an auto truck, much less pedal required for most driving
 
Ok here's the specs on my truck.
Built trans triple disk. Custom valve body work
Timing 17*
#10 fuel plate
5x.016
Check valve mod on pump.
I have a fass on the way should be here in the next few days.
The best I can get is 2900-3000 rpms it runs alright but not turning 3500 or more. I also put the 60 lb springs in. I turned the high idle screw all of the way in. I tried 4 clicks it fell on its face. I tried 3 clicks itok ran ok. Tried 2 clicks ran ok.
 
I plan on checking it this weekend. I don't drive a lot just my weekend warrior. I'll let you know what I find.
 
it will be more and more "touchy" the more clicks you run

at this point, it sounds like your springs are ok, there is something else holding you back
 
I'm thinkin a fuel issue. I'm pitting in a fuel pressure gauge this weekend n see what happens
 
You must log in or register to reply here.
Back
Top