-4 vs. -6 oil feeds

[roachie]

I've seen both used. And from what I understand, if you not using an oem restrictor in the cartridge inlet a -4 is the way to go.


Input?

 

[GRotman]

-4 ftw.

 

[carcrafter22]

-4 is plenty.

 

[joefarmer]

I use -6 on anything bigger than a s400. -4 is plenty for a s300/s400.

 

[2141pete]

I run -4 for my S400. My factory fitting stripped out above the filter so I tapped it with 1/8npt with no problems.

 

[Jim Fulmer]

Way back when the dinosaurs roamed the earth we used a -6 cause they had more available fittings, a -4 is more than enough!

Jim

 

[SNOOT]

I use -4 line with -6 hose ends...:lolly:

 

[C111]

-4 all the way.