4k kit

and i have a pull sunday and dont have the money to get it done and it is the last pull of the year
 
Yea. SHould take an two hours tops your first time. Less if you have any clue or mechanical skills
 
thank u i have phone calls to make tomorrow to find a valve tool i want 4k bad
 
NICE timing kit I found!

Not sure if this has been posted before, but I was googling "tappet covers" and found this timing kit. Looks sweet! All you need is the DV socket for $30-$35 and you have a timing kit for $100 less than snap-on.
I also think hes a member on here. EATSOOT?
Cummins Timing Tool Kit
 
i hit 3500 on stock springs now i idle at 1000 how do u adjust idle
 
bs&t said:
i hit 3500 on stock springs now i idle at 1000 how do u adjust idle
Click to expand...

From another thread:

ILLINOISRAM said:
On the gov. housing, right behind the actuall throttle lever, there is a 10mm adjuster bolt. Move the throttle forward so you can get to the screw, break the 10mm nut on bottom loose, and turn the screw up by hand. You can leave it loose and start it to see how much you have gained. Cummins spec is 900rpms but you will probably find it wants to pull all the time like at stop lights so 800-850 at idle in park shuold do the trick. Tim
Click to expand...
 
oh ok i think i know where u are talking about thank you. i will try to get to it tomorrow some time
 
You must log in or register to reply here.
Back
Top