ChrisG88
New member
- Joined
- Jun 27, 2011
- Messages
- 219
I've always been a single turbo fan, also a fan of high horsepower street trucks. My journey of "large" singles began with a s467. I ran almost every size s400 imaginable. After destroying a few stock engines with some mid-low 6 second passes I decided it was time for a built engine. 2019 a mild built 6.7 was installed that went a best of 6.14 using a FI s485 but the engine didn't last long due to a thrust bearing failure which cracked the crank. 2020 the damaged 6.7 was replaced with a deckplate 6.7 from D&J. A FI 488 was ran to break in the new deckplate engine and went a best of 6.10 fuel only. 2021 brought a new setup for me... Gtx5533r 91mm, 400% exergy injectors, 2 12mm exergy pumps, and many more changes. Earlier this year I went to Firepunk for some dyno tuning and made 1649hp fuel only and 2093hp with nitrous. I had a ton of support, encouragement, and also some skepticism with those numbers. Always fan of track times to prove power rather than dyno numbers, I was determined to back up the power my truck made. 3 no prep passes with the setup and a very small amount of nitrous on tune 3 was all that was ran. The truck was working great. It was time to make my first pass at a prepped track with the new setup but was unsure how much nitrous to throw at it. I decided to run on tune 3 with 4 kits thinking the truck would go 5.80s or so. Kit 1 was a .040 spool jet, 2 a .052 instant on as soon as the brake is released, 3 .093 time delayed, and 4 .136 time delayed. The truck made a clean pass and went 5.60@130.5 with a 1.38 60ft. Beyond happy with it for a streetable 6300lb truck . Next goal is a 5.50/135mph. I'm very thankful for everyone who has helped with the build, been supportive, and push me to go quicker.
Thanks for taking the time to read!
Sent from my SM-G998U using Tapatalk
Thanks for taking the time to read!
Sent from my SM-G998U using Tapatalk