1SlowFummins
New member
- Joined
- Feb 13, 2012
- Messages
- 121
Can anyone take a picture of the back of their 6.0 main harness connector going into pcm (Center connector on computer in left fender). I need a pic with the plastic part taken off and wires exposed. I accidentally pulled out the yellow with white stripe wire that goes to the water temp sensor when rebuilding my harness and need to reinsert it into the right one so my water temp gauge will work inside the cab (my ocd does not allow a dead gauge). If your looking at the ecu connector from the back I believe its plugs into the second row towards the right. Just need to know exactly which pin/hole. I believe that is the only wire that color that plugs into the main connector.
Thanks
Thanks