WideOpenThrottl
New member
- Joined
- Apr 22, 2007
- Messages
- 119
P7100 out of a 94 manual, I was told it has a 4k gsk, laser cuts and a fuel plate, but if you want I can check to see if it has laser cuts, I have the socket to do so, but odds are the oring will tear, I can also check to see what fuel plate it has. $700, PM or call 651-261-5878
The motor is being sold as a motor to rebuild, I can see that the head gasket is blown and there may be piston damage, if interested I can pop the head off and take a closer look, does not come with the p pump, unless someone wants a package deal. $600obo.
NV4500 and the T-case out of the same 94, the truck was drivable until the motor/headgasket went, so the drivetrain should be fine, though I noticed when I pulled the it out that someone at sometime had put some epoxy on the side of the T-case housing. $700obo.
PM or call 651-261-5878
The motor is being sold as a motor to rebuild, I can see that the head gasket is blown and there may be piston damage, if interested I can pop the head off and take a closer look, does not come with the p pump, unless someone wants a package deal. $600obo.
NV4500 and the T-case out of the same 94, the truck was drivable until the motor/headgasket went, so the drivetrain should be fine, though I noticed when I pulled the it out that someone at sometime had put some epoxy on the side of the T-case housing. $700obo.
PM or call 651-261-5878
