getblown5.9
Ceritified Kleenex Dealer
- Joined
- Aug 3, 2006
- Messages
- 7,259
on my second gen long bed, there were already holes there from the factory to move the hitch back 4" its not much but every little bit helps i suppose.
silvercummins96 said:lose the bumper and go forward and up
oldschoolPSD said:Thats what I'm thinking for the Tuckahoe pull, but this weekend's pull is at the Buck. Knowing their tech guys, they will probably want to stick in in the modified class if I either notch my bumper or take it off.
Hitch:
The hitch must be a "Reese"-style hitch; reinforcements are permitted. Trick hitches are prohibited. The hooking point must be the rear-most point on the vehicle and must be rearward of the stock location of the tailgate. The hitch must be horizontal to the ground and stationary in all directions. Bumpers may be notched or removed. The hitch's height from the ground may not exceed 26 inches. The hooking point must have a minimum 3.00 inch inside diameter opening for the sled hook. The hooking point will be measured to the center of the clevis loop.
If I saw that place on fire I wouldnt stop and pee on it to put the fire out.They treat pullers like crap.Makeing up rules on the spot is an under statementgetblown5.9 said:hell no...they make their rules up on the spot at the buck