Cozze44
Junkman
- Joined
- Feb 9, 2012
- Messages
- 1,315
- Airdog II 4G 165 gph
Set for VP pressure
Approx 20k miles of run time.
Comes with heavily used (Obamaed) Harness - Is still in good working order
Can include plumbing which is 10 years old and looks as such
-$400 shipped
- Airdog II 4G 165 gph
Set for PPump pressure
Zero run time since rebuilt
Comes with fittings that screw into pump assy and new filters ONLY
Link from who I originally bought it - http://www.competitiondiesel.com/forums/showthread.php?t=184522&highlight=airdog - Ended up going with a mechanical pump so I have no use.
-$300 shipped
- ED 50 mm gate
Anodized black top
Gate ONLY - no clamps
- $200 shipped
- 2nd Gen 24v Compound Over/Under kit
All used but in nice shape unless noted:
Comes with:
http://sourceautomotive.biz/24vs400turbomounttoengine-1.aspx
Homemade hot pipe similar to this: http://sourceautomotive.biz/s300hotpipetos400turbo.aspx
Drain tubes
Homemade Charge pipe, painted black, one small dent and paint chip. Similar to this: http://sourceautomotive.biz/chargeairtube-powdercoated-1.aspx
Oil pressure lines
Homemade cold intercooler pipe.
*** These are the only parts it comes with. If it is not on the list, then I don't have it. ***
$750 Shipped
- Used ATS billet flex plate
$150 shipped
- Set of 6.7L industrial pistons, shaved .020 off the top swaintech gold coated tops
-25k, coating in nice shape
$300 shipped
Pictures available, and will be posted within a day or two at most!
Set for VP pressure
Approx 20k miles of run time.
Comes with heavily used (Obamaed) Harness - Is still in good working order
Can include plumbing which is 10 years old and looks as such
-$400 shipped
- Airdog II 4G 165 gph
Set for PPump pressure
Zero run time since rebuilt
Comes with fittings that screw into pump assy and new filters ONLY
Link from who I originally bought it - http://www.competitiondiesel.com/forums/showthread.php?t=184522&highlight=airdog - Ended up going with a mechanical pump so I have no use.
-$300 shipped
- ED 50 mm gate
Anodized black top
Gate ONLY - no clamps
- $200 shipped
- 2nd Gen 24v Compound Over/Under kit
All used but in nice shape unless noted:
Comes with:
http://sourceautomotive.biz/24vs400turbomounttoengine-1.aspx
Homemade hot pipe similar to this: http://sourceautomotive.biz/s300hotpipetos400turbo.aspx
Drain tubes
Homemade Charge pipe, painted black, one small dent and paint chip. Similar to this: http://sourceautomotive.biz/chargeairtube-powdercoated-1.aspx
Oil pressure lines
Homemade cold intercooler pipe.
*** These are the only parts it comes with. If it is not on the list, then I don't have it. ***
$750 Shipped
- Used ATS billet flex plate
$150 shipped
- Set of 6.7L industrial pistons, shaved .020 off the top swaintech gold coated tops
-25k, coating in nice shape
$300 shipped
Pictures available, and will be posted within a day or two at most!