Axle swap questions

[NYCEGUY01]

I have a 98 12v.
It has SRW Dana 80 and 60 axles.
Im looking to swap them for a 4.10 geared set from a dually.

What years will bolt in and work. I know any 2nd gen set will physically bolt in but I want to make sure the speed sensor and 4wd activacion is also a plug in and go etc....

What years can I swap with ?

 

[stubz616]

I know the loxer spring plates are different on a dually than a SRW on the rear end because the dually's axle tubes step down just to the outside of the springs behind the backing plates while a SRW's tubes stay one consistant width where the spring plate (U bolt plate) comes in contact with the rearend. So you'll need the plates too if you're just getting axles.