blackmega3500
New member
- Joined
- Jun 24, 2011
- Messages
- 4,553
Since the fueling systems being replaced opted to replace my pos looking and cracked factory valve cover.
Tyler Kipp runs one on his race truck and it's polished, but I like the raw metal look personally.
There's not much out there on these so figured I'd post some info.
My initial opinion is Jared Vollmer at Breakout tuning did a great job having this casted piece put together. The CCV baffle is well made with 2 3/4 npt, and the sensor port for the factory 6.7 sensor is pre cast with you having the option to drill it out or not. Also has tapped npt reference ports and provides plugs. He includes all new hardware and grommets for installation. Also came with the new oil fill cap.
Over all a really nice quality piece at first glance, and looking forward to getting it buttoned on.
Tyler Kipp runs one on his race truck and it's polished, but I like the raw metal look personally.
There's not much out there on these so figured I'd post some info.
My initial opinion is Jared Vollmer at Breakout tuning did a great job having this casted piece put together. The CCV baffle is well made with 2 3/4 npt, and the sensor port for the factory 6.7 sensor is pre cast with you having the option to drill it out or not. Also has tapped npt reference ports and provides plugs. He includes all new hardware and grommets for installation. Also came with the new oil fill cap.
Over all a really nice quality piece at first glance, and looking forward to getting it buttoned on.