Budget Beater!

[DieselLance]

no build thread for me, not doing anything special or much different that TTR_21

yeah i'm running large twins and 5X20ish injectors

 

[Gasoline Sucks]

That farm truck was no joke even with all those miles

 

[TTR 21]

Budget Beater Blue!

 

[TTR 21]

1552 CFM from a 74.6mm of pure greatness. The 1.25 turbine housing is going to be fun!

 

[TTR 21]

Holes Filled



Tapper Cover Beater Style



Mocking Up The Fuel Pumps

 

[DieselLance]

that pump set up looks familiar, awesome set up

 

[scat]

I could call mine a budget beater but who has a budget in power? Im surprised you didnt go with a bigger cam what needs flycuts.

 

[TTR 21]

Going with a 188/220 Hamilton. Work great with my setup.

 

[kleann]

that pump set up looks familiar, awesome set up

What pump setup is that?

 

[DieselLance]

HD and a FA compounding pressure with a regulator on the return to get pressure up

 

[TTR 21]

I'm running my setup a little different since ill be driving it to every event. Titanium will feed main port on injection pump and be controlled with boost compensated regulator. HPFP will feed front port on injection pump and be controlled the same way but only be used when I'm at the track. HPFP powered by a switch in cab.

 

[shiftycapone]

HD and a FA compounding pressure with a regulator on the return to get pressure up

HD and FA?

 

[DieselLance]

I'm running my setup a little different since ill be driving it to every event. Titanium will feed main port on injection pump and be controlled with boost compensated regulator. HPFP will feed front port on injection pump and be controlled the same way but only be used when I'm at the track. HPFP powered by a switch in cab.

well look at you getting all fancy

 

[BRE]

Anxious to see this one hit the track!

 

[TTR 21]

Anxious to see this one hit the track!

I'm just excited to hear it finally run haha. Soon I hope

 

[FASSSpencer]

Hey Tyler when you get a chance give me a call about those 2 pumps. 636-433-2957

 

[TTR 21]

Hey Tyler when you get a chance give me a call about those 2 pumps. 636-433-2957

Just saw this. Call ya tomorrow.

 

[TTR 21]

Industrial Injection 5x.018 SAC injectors



BD T-3 to T-4 Diverter Valve



All put together

 

[NickTF]

^^^ Few words of advice on the diverter: 1) make sure you run fuel injection hose or wastegate hose rated for the boost and heat you will see; 2) make sure your clamping system or fastening system does not have the ability to allow the air hose to blow off; and 3) get the air to the actuator from the cold side (post intercooler) to avoid any excessive heat to the actuator and hose. Good luck!

 

[shiftycapone]

So, what is the lift pump setup?