05MonsterDmax
New member
- Joined
- Sep 21, 2010
- Messages
- 35
Putting truck back to stock since its only used to pull a camper, can't justify buying a new lml, and I've found some land I want so time to move all the go go parts. Block is a lly casting. Carrillo rods, lly SoCal cut pistons and rings, keyed/polished cam, keyed /polished new GM crank (didn't want to reuse old one after seeing so many break) ati damper, arp studded, new oilers, aligned honed Mains, tq plate honed cylinders, block decked, balanced, No ends cut. Looking for $6k cash and a good low mile stock bottom end. All machine work was done by competition machine in ky and assembled by Matt Woertz at blackout diesel.
If you have a low mile (100k or so) lly studded stock block with grade c gaskets ill throw my heads in on the deal. Their oem reworked with new valves, seats, Hamilton 125lb springs and retainers.
Located in Louisville ky. Will drive a reasonable ways to make a deal
If you have a low mile (100k or so) lly studded stock block with grade c gaskets ill throw my heads in on the deal. Their oem reworked with new valves, seats, Hamilton 125lb springs and retainers.
Located in Louisville ky. Will drive a reasonable ways to make a deal