PTPULLINCHASSIS
DEALS ON REAL WHEELS
- Joined
- Oct 1, 2008
- Messages
- 709
HERE ARE THE RULES FOR THE 2.6 CHEATER STOCK DIESEL, PRO STREET DIESEL, AND THE 8000LB. OPEN CLASS. I WILL START POSTING SOME OF THE SCHEDULE TONIGHT.
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
740-819-6200
740-468-9045 FAX
RULES FOR "2009"
8000LB. "CHEATER STOCK 2.6 DIESEL TRUCK"
1. TRUCKS CAN BE TRAILERED IN, BUT MUST MEET THE REST OF OUR RULES FOR THE CHEATER STOCK DIESEL CLASS.
2. TRUCKS COMPETING IN THIS CLASS MUST BE STOCK IN APPEARANCE.
3. ENGINE, AND DRIVETRAIN MUST COME FACTORY IN A 1 TON OR LESS PICKUP.
4. THIS CLASS IS LIMITED TO A SINGLE CHARGER. THE INDUCER BORE CAN'T EXCEED 2.60". THIS WILL BE TECHED USING A 2.65" PLUG, IF THE PLUG GOES IN YOU WILL BE DISQUALIFIED. NO REDUCERS OF ANY KIND PERMITTED TO MAKE A LARGER TURBO PASS INSPECTION. THIS ALSO INCLUDES WELDING AND REMACHINING INDUCER BORE TO MAKE A LARGER TURBO PASS. THE STOCK MAP WIDTH ENHANCEMENT (MWE) GROOVE IS ALLOWED. NO MWE GROOVE WIDER THAN A 1/4" WILL BE PERMITTED. TWINS ARE PERMITTED AS LONG AS THEY ARE O.E.M. FOR THAT TRUCK.
5. DIESEL FUEL AND BIO DIESEL ARE THE ONLY FUELS PERMITTED IN THIS CLASS.
6. SMOKE MUST EXIT UP THROUGH STACKS OR YOU WILL NEED A TURN UP ON YOUR TAIL PIPE. NO EXCEPTIONS!!!
7. REAR OEM STYLE SUSPENSION REQUIRED. SOLID SUSP. BLOCKS AND TRACTION BARS ARE PERMITTED.
8. MUST PULL OFF OF A REESE TYPE HITCH, MOUNTED SOLID TO THE FRAME W/NO MOVEMENT. REINFORCEMENTS PERMITTED. HOOKING POINT MUST BE THE FURTHEST POINT BACK OF THE TRUCK AND A MAXIMUM OF 26" HIGH ON 4WD TRUCKS AND 30" ON 2WD TRUCKS.
9. FRONT WEIGHTS AND BRACKETS CAN'T EXCEED 60" FROM CENTER OF FRONT AXLE.
10. ANY D.O.T. APPROVED TIRE IS PERMITTED. NO CUTTING OR SHARPENING OF TIRES PERMITTED.
11. NO NITROUS, PROPANE, OR ANY OTHER PRESSURIZED FUEL PERMITTED. ANY TANKS, LINES, OR ETC. MUST BE REMOVED FROM TRUCK BEFORE COMPETING.
12. MANDITORY SAFETY: ALL TRUCKS MUST HAVE 6" LONG U-JOINT SHIELDS COVERING REAR END YOKE, REAR OUT PUT YOKE, FRONT OUT PUT YOAK, AND FRONT END YOKE. THE FRONT OUT PUT YOKE COVER IS NOT REQUIRED IF LACK OF ROOM PEVENTS INSTALLATION. SHIELD THICKNESS REQUIREMENTS ALUMINUM MIN. 3/8" AND STEEL MIN. 1/4".
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
740-819-6200
740-468-9045 FAX
RULES FOR 2009
8000LB. “PRO STREET” 4X4
1. THIS CLASS IS DESIGNED FOR HIGH PERFORMANCE 2 AND 4WD TRUCKS. OPEN DRIVELINE IS PERMITTED. FIBERGLASS BODIES AND TUBE CHASSIS FRAMES ARE PROHIBITTED.
2. ENGINES MUST BE OEM AND AVAILABLE IN 1 TON OR LESS PICKUPS. NO AFTERMARKET HEADS OR BLOCKS PERMITTED.
3. NO SIGMA INJECTOR PUMPS PERMITTED.
4. SINGLE CHARGERS ARE UNLIMITED.
5. LIMITED TWIN CHARGER SET UPS ARE PERMITTED. THE INDUCER BORE ON THE ATMOSPHERE CHARGER IS LIMITED TO 3.2”. A 3.25" PLUG WILL BE USED TO TECH THESE TRUCKS. BUSHINGS ARE PERMITTED.
6. NO NITROUS, OR PROPANE. ALL TANKS AND LINES MUST BE REMOVED FROM TRUCKS BEFORE COMPETING.
7. FRONT WEIGHTS AND BRACKETS MAY NOT EXCEED MORE THAN 60" FROM CENTER OF FRONT AXLE.
8. SOLID REAR SUSPENSION AND TRACTION BARS ARE PERMITTED.
9. PULLING TYPE HITCHES ARE PERMITTED, HOOK POINT ATLEAST 36" BEHIND THE CENTER OF REAR AXLE. MAX 26” HIGH ON 4WD AND 30” HIGH ON 2WD.
10. ANY D.O.T. APPROVED TIRE PERMITTED. NO CUTTING OR SHARPENING OF TIRES PERMITTED.
11. SAFTEY REQUIREMENTS. MUST HAVE DRIVE SHAFT LOOPS AND U-JOINT SHIELDS ON FRONT AND REAR SHAFTS. U-JOINT SHIELDS MUST BE ATLEAST 3/8” THICK ALUMINUM OR ¼” THICK STEEL. BLOWPROOF BELLHOUSINGS, OR BLANKETS OR BELLHOUSING SHIELDS REQUIRED. AIR OR FUEL SHUT OFF KILL SWITCHES REQUIRED.
12. SMOKE MUST EXIT STRAIGHT UP. TURN UPS REQUIRED ON TAIL PIPES.
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
"2009"
8000LB. OPEN 4X4 GAS/DIESEL RULES
1. 26" HITCH MAX
2. ALL SAFETY SHEILDS BELLHOUSINGS, BLANKETS AND KILL SWITCHES REQUIRED.
3. NO CRYING!!!!!
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
740-819-6200
740-468-9045 FAX
RULES FOR "2009"
8000LB. "CHEATER STOCK 2.6 DIESEL TRUCK"
1. TRUCKS CAN BE TRAILERED IN, BUT MUST MEET THE REST OF OUR RULES FOR THE CHEATER STOCK DIESEL CLASS.
2. TRUCKS COMPETING IN THIS CLASS MUST BE STOCK IN APPEARANCE.
3. ENGINE, AND DRIVETRAIN MUST COME FACTORY IN A 1 TON OR LESS PICKUP.
4. THIS CLASS IS LIMITED TO A SINGLE CHARGER. THE INDUCER BORE CAN'T EXCEED 2.60". THIS WILL BE TECHED USING A 2.65" PLUG, IF THE PLUG GOES IN YOU WILL BE DISQUALIFIED. NO REDUCERS OF ANY KIND PERMITTED TO MAKE A LARGER TURBO PASS INSPECTION. THIS ALSO INCLUDES WELDING AND REMACHINING INDUCER BORE TO MAKE A LARGER TURBO PASS. THE STOCK MAP WIDTH ENHANCEMENT (MWE) GROOVE IS ALLOWED. NO MWE GROOVE WIDER THAN A 1/4" WILL BE PERMITTED. TWINS ARE PERMITTED AS LONG AS THEY ARE O.E.M. FOR THAT TRUCK.
5. DIESEL FUEL AND BIO DIESEL ARE THE ONLY FUELS PERMITTED IN THIS CLASS.
6. SMOKE MUST EXIT UP THROUGH STACKS OR YOU WILL NEED A TURN UP ON YOUR TAIL PIPE. NO EXCEPTIONS!!!
7. REAR OEM STYLE SUSPENSION REQUIRED. SOLID SUSP. BLOCKS AND TRACTION BARS ARE PERMITTED.
8. MUST PULL OFF OF A REESE TYPE HITCH, MOUNTED SOLID TO THE FRAME W/NO MOVEMENT. REINFORCEMENTS PERMITTED. HOOKING POINT MUST BE THE FURTHEST POINT BACK OF THE TRUCK AND A MAXIMUM OF 26" HIGH ON 4WD TRUCKS AND 30" ON 2WD TRUCKS.
9. FRONT WEIGHTS AND BRACKETS CAN'T EXCEED 60" FROM CENTER OF FRONT AXLE.
10. ANY D.O.T. APPROVED TIRE IS PERMITTED. NO CUTTING OR SHARPENING OF TIRES PERMITTED.
11. NO NITROUS, PROPANE, OR ANY OTHER PRESSURIZED FUEL PERMITTED. ANY TANKS, LINES, OR ETC. MUST BE REMOVED FROM TRUCK BEFORE COMPETING.
12. MANDITORY SAFETY: ALL TRUCKS MUST HAVE 6" LONG U-JOINT SHIELDS COVERING REAR END YOKE, REAR OUT PUT YOKE, FRONT OUT PUT YOAK, AND FRONT END YOKE. THE FRONT OUT PUT YOKE COVER IS NOT REQUIRED IF LACK OF ROOM PEVENTS INSTALLATION. SHIELD THICKNESS REQUIREMENTS ALUMINUM MIN. 3/8" AND STEEL MIN. 1/4".
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
740-819-6200
740-468-9045 FAX
RULES FOR 2009
8000LB. “PRO STREET” 4X4
1. THIS CLASS IS DESIGNED FOR HIGH PERFORMANCE 2 AND 4WD TRUCKS. OPEN DRIVELINE IS PERMITTED. FIBERGLASS BODIES AND TUBE CHASSIS FRAMES ARE PROHIBITTED.
2. ENGINES MUST BE OEM AND AVAILABLE IN 1 TON OR LESS PICKUPS. NO AFTERMARKET HEADS OR BLOCKS PERMITTED.
3. NO SIGMA INJECTOR PUMPS PERMITTED.
4. SINGLE CHARGERS ARE UNLIMITED.
5. LIMITED TWIN CHARGER SET UPS ARE PERMITTED. THE INDUCER BORE ON THE ATMOSPHERE CHARGER IS LIMITED TO 3.2”. A 3.25" PLUG WILL BE USED TO TECH THESE TRUCKS. BUSHINGS ARE PERMITTED.
6. NO NITROUS, OR PROPANE. ALL TANKS AND LINES MUST BE REMOVED FROM TRUCKS BEFORE COMPETING.
7. FRONT WEIGHTS AND BRACKETS MAY NOT EXCEED MORE THAN 60" FROM CENTER OF FRONT AXLE.
8. SOLID REAR SUSPENSION AND TRACTION BARS ARE PERMITTED.
9. PULLING TYPE HITCHES ARE PERMITTED, HOOK POINT ATLEAST 36" BEHIND THE CENTER OF REAR AXLE. MAX 26” HIGH ON 4WD AND 30” HIGH ON 2WD.
10. ANY D.O.T. APPROVED TIRE PERMITTED. NO CUTTING OR SHARPENING OF TIRES PERMITTED.
11. SAFTEY REQUIREMENTS. MUST HAVE DRIVE SHAFT LOOPS AND U-JOINT SHIELDS ON FRONT AND REAR SHAFTS. U-JOINT SHIELDS MUST BE ATLEAST 3/8” THICK ALUMINUM OR ¼” THICK STEEL. BLOWPROOF BELLHOUSINGS, OR BLANKETS OR BELLHOUSING SHIELDS REQUIRED. AIR OR FUEL SHUT OFF KILL SWITCHES REQUIRED.
12. SMOKE MUST EXIT STRAIGHT UP. TURN UPS REQUIRED ON TAIL PIPES.
PERFORMANCE TRUCK & TRACTOR PULLING SERIES
"2009"
8000LB. OPEN 4X4 GAS/DIESEL RULES
1. 26" HITCH MAX
2. ALL SAFETY SHEILDS BELLHOUSINGS, BLANKETS AND KILL SWITCHES REQUIRED.
3. NO CRYING!!!!!
oke:aready wants me to tow him smokingoat so I guess with the new found power I could tow you also on the 270 drive. Thats what friends are for. Jeff
