03powerstroke35 New member Joined Jun 6, 2006 Messages 299 Dec 15, 2008 #1 What now, what else could be the culprit??:bang
w_huisman New member Joined May 5, 2008 Messages 37 Dec 16, 2008 #2 Bedplate, turbo oil feed or oil return, IPR...
03powerstroke35 New member Joined Jun 6, 2006 Messages 299 Dec 16, 2008 #3 checked and re-checked all the above^^
PSDPlayer Captain Negativity! Joined Apr 22, 2006 Messages 3,284 Dec 16, 2008 #4 Brake clean the **** out of it. Then retest.
Extended Power New member Joined May 19, 2006 Messages 2,978 Dec 17, 2008 #6 Check your valve cover gaskets, and glow plug seals.
03powerstroke35 New member Joined Jun 6, 2006 Messages 299 Dec 18, 2008 #7 Brake cleaned with an entire can, i think it was residual in the bell housing
PSDPlayer Captain Negativity! Joined Apr 22, 2006 Messages 3,284 Dec 19, 2008 #8 Somtimes the oil will get between the engine and transmission. Then it takes a ride around the converter and the flexplate. Once you fix the leak, and then get it warm again. You can still have some oil come back from the inside.
Somtimes the oil will get between the engine and transmission. Then it takes a ride around the converter and the flexplate. Once you fix the leak, and then get it warm again. You can still have some oil come back from the inside.