Check out my new bling!!

I use that sealer and that sealer only without any type of gasket and have had no issues as of yet. Works great. $20 for 8 oz. though. You don't want to see what my motor looks like adam. I didnt even paint it. I just wanted it together and running. No time to watch the paint dry. Ill see if Gilmore has some pics of it. How bout you trade me out one like you have shown. Then when someone pops the hood they can tell who made it or ask who made it. Right now they are like " Wow, what a rusty red neck" haha! Oh well. In the off season I am gonna make her look pretty I suppose!:rockwoot:
 
Well in the off season, send it back to me and we will make it pretty.

What kind of boost u making?
 
How exactly do these bolt up? Do you have to drill and tap holes for the studs? How are you cutting the stock intake off? Just curious. Awesome work by the way!

Eric
 
BigYellowIron said:
Well in the off season, send it back to me and we will make it pretty.

What kind of boost u making?
Click to expand...
Don't have a clue. Don't have ANY gauges hooked up haha!!

ONEBAD12VALVE said:
how do you run the fuel line.
Click to expand...
Gotta bend your own. No big deal at all. I can get you some unbent ones for a good price.

Cummins Driver said:
How exactly do these bolt up? Do you have to drill and tap holes for the studs? How are you cutting the stock intake off? Just curious. Awesome work by the way!

Eric
Click to expand...
Cut the stock intake off, mill it down flat. Drill and tap your holes where you want them or where Adam puts the holes in the manifold.
 
Thanks for explaining that. I wasnt exactly sure of the process, but figured that was how it works. Pretty sweet setup for sure!

Eric
 
2Tone12V said:
Don't have a clue. Don't have ANY gauges hooked up haha!!

Gotta bend your own. No big deal at all. I can get you some unbent ones for a good price.


Cut the stock intake off, mill it down flat. Drill and tap your holes where you want them or where Adam puts the holes in the manifold.
Click to expand...



Yep thats it, I have one I working on now that will allow room for the stock inj lines, its kinda kickin my @ss right now. Ill get it done thou.
 
BigYellowIron said:
Yep thats it, I have one I working on now that will allow room for the stock inj lines, its kinda kickin my @ss right now. Ill get it done thou.
Click to expand...

Sweet! I bet there will be a few wanting one like that. Much more work friendly will help sell a few. Good luck with them.
 
BigYellowIron said:
Unassembled, you mean not welded?
Click to expand...
That'd be it! I have a 20x5" space above the valve cover that we tucked into the original hood design (designated by paint cans):

hood_fab9.jpg


I need to fit it inside that small window with a few other tricks. ;)
 
Can you pm me a price on one with nitrous ports. And how long to get one, once you have an order. Thanks.
 
joefarmer said:
That'd be it! I have a 20x5" space above the valve cover that we tucked into the original hood design (designated by paint cans):

hood_fab9.jpg


I need to fit it inside that small window with a few other tricks. ;)
Click to expand...

Hey I recognize that mock up.... gotta love sharpy markers, carboard and masking tape!
 
HotRodTractor said:
Hey I recognize that mock up.... gotta love sharpy markers, carboard and masking tape!
Click to expand...
"I guess we'll just cut it here then..."
"uh, Jason, that only leaves 2.00" of original hood in the rear"
"oh. ... well I suppose I'll get a telephone book under me to drive" :hehe:
 
BigYellowIron said:
Yep thats it, I have one I working on now that will allow room for the stock inj lines, its kinda kickin my @ss right now. Ill get it done thou.
Click to expand...
:hehe: And I am patiently awaiting your completion of it!!!!!:rockwoot::rockwoot::rockwoot:
 
You must log in or register to reply here.
Back
Top