Cleaning the 6.7 parts out of the garage

S

Sparkplug

New member
Joined
Apr 29, 2012
Messages
37
If anyones looking for 6.7 parts I'm cleaning out the garage need room for the new project. Pm me with what your looking for
 
I also have an almost complete motor I'm parting out block head crank injectors Everything valvecover to oilpan
 
Ok. What about a price on crank, block, injectors, and head? Do you know if the head is good, not cracked?
 
The head has less then 1000 miles on new valves, springs and seals- 700.00 injectors came out of a running truck they come compleat with hold downs also delivery tubes 800.00 block has 100k on it still has good crosshatch and is std bore 950.00 crank will need turned or polished it spun a bearing it's also had a 7mm key slot milled into it 650.00. All prices are Obo
 
You've been here for 9 months and still post a phucking sale thread in a tech forum?
WTF is wrong with people?

Moved....
 
I was onthe FS section when I posted it idk why it went to tech! Parts are located in dayton ohio
*parts have around 1000-1500 miles on them other then the block it has 100,000 mile but still has the cross hatching in it.... *The head was also gone threw about 1000-1500 miles ago so new seals valves etc..here we go*
Good Std bore block-950.00
Good Head with springs&valves-700
Crank with 7mm key cut in it! spun*
#2 rod bearing needs polished or turned-650.00
compleat injectors out of running truck with hold downs and delivery tubes-800.00
6 Mahle std bore pistons with pins 1000-1500 miles on them-600.00*
12 rockers -200.00
Push rod tubes with 1000 miles-125.00
Harmonic balancer-200.00
Fan pulley& bracket with bolts 75.00
Connecting rods-
Oil pan- 150
Compleat valvecover-125.00*
Flex plate- 50.00
*All parts are Obo but be reasonable
 
Last edited:
I'm interested in the head and injectors. I could come pick them up to save you the trouble of shipping.
 
Good Std bore block-900.00
Good Head with springs&valves-700
Crank with 7mm key cut in it! spun*
#2 rod bearing needs polished or turned-650.00
compleat injectors out of running truck with hold downs and crossover tubes-800.00
6 Mahle std bore pistons 2 have some rash may not be useable ? -400*
12 rockers with bridges -200.00
Push rod tubes with 1000 miles-125.00
Harmonic balancer-200.00
Fan pulley& bracket with both pullys & bolts 75.00
Oil pan- 150
Compleat valvecover-125.00*
Flex plate- 50.00
Rocker housing-100
Water pump- 25
Bell housing- 50
Connecting rods-450
All parts are Obo I will not hold any parts been stiffed to many times so everything is sold on first come first serve basis I can send pics of all parts via phone
 
Took the crank to the machine shop this morning they said after all th bearing is cleaned off the spun journal it would probably polish out worst case said it would clean up For sure with a .010 grind.
 
You must log in or register to reply here.
Top