biggy238
Active member
- Joined
- Aug 3, 2008
- Messages
- 10,982
I installed a 2897333 (6.7L) combination sensor on my "bench" harness.
I can't get my CM849 to display anything other than 8psi baro and 160 degrees ambient. I've tried to rescale the baro. It isn't changing.
I have the same sensor connected to the intake horn and it reads correctly, albeit I have 5psi of boost due to the incorrect baro. Temp is 2 degrees higher than ECT cold soaked.
So, I duplicated the intake pressure scale for the baro. Still at 8psi.
I don't understand how the voltage axis works?
Can someone post a screen shot of a "deleted" baro sensor? I would like to keep the input for mountain driving. It may not play that great a role, but I don't want to find out that it matters while I'm away from home.
Thanks
Kyle
Sent from my SM-G950U using Tapatalk
I can't get my CM849 to display anything other than 8psi baro and 160 degrees ambient. I've tried to rescale the baro. It isn't changing.
I have the same sensor connected to the intake horn and it reads correctly, albeit I have 5psi of boost due to the incorrect baro. Temp is 2 degrees higher than ECT cold soaked.
So, I duplicated the intake pressure scale for the baro. Still at 8psi.
I don't understand how the voltage axis works?
Can someone post a screen shot of a "deleted" baro sensor? I would like to keep the input for mountain driving. It may not play that great a role, but I don't want to find out that it matters while I'm away from home.
Thanks
Kyle
Sent from my SM-G950U using Tapatalk