cumminspwrd
New member
- Joined
- Dec 15, 2009
- Messages
- 293
Sold my rolling chassis from my 2.6 puller and have the following items leftover and need to move them. Everything is in great condition.
I will try and post pics of everything later this weekend or I can easily text pics.
I tried to find comparable prices and priced these items accordingly. If something is way off, then let me know, Thanks
Arp 625's, 1 torque on them.
$900
Short Block: Not even a complete season on it, Always used Schaffer Racing Oil:
Piston and Block are a factory 50K
Then had the following installed last year
Shoot peened,polish, and cryo'd 12V rods w/ ARP Bolts and new bearings
Billet freeze plugs
O-ringed
Hami 188-220 w/ new tappets
Ati Dampner
$7,000
D&J 6.7 side draft manifold,
Was on truck less than 2 months
Comes with hardware and machining instruction on how to cut head and bolt hole location. D&J also preps head for there manifold for $150.
New is $900, Will take $800
6.7 Complete Fuel Rail (RP/PRV/Lines)w/ Cp3 line and feed tubes (torqued once)
Can Included ATS Dual Cp3 lines and junction block for RP Sensor that go from top pump to back of rail.
$400
Airdog II 200 series, I have 2, both worked flawlessly, on truck 1 season.
Comes with base assembly/motor/filters and new lines and sump. You will need a harness and some other misc./fittings
$500 ea.
Toops EFI Conversion Kit for 03-05 Competition Style (No Dash)
Comes with everything you need:
Ecm, modified harness, fuel pedal, lower valve cover, Injector harness and Hellman performance Upper valve cover with Braided stainless vent hoses
$4000
Complete Rocker/ Push Rod setup:
All intake & exhaust rockers w/ bases and Bridges
24v Style ends (not plastic crap)
ECD Comp. Push Rods
http://ecddiesel.com/ecd-heavy-duty-pushrods.html?
$300
I will try and post pics of everything later this weekend or I can easily text pics.
I tried to find comparable prices and priced these items accordingly. If something is way off, then let me know, Thanks
Arp 625's, 1 torque on them.
$900
Short Block: Not even a complete season on it, Always used Schaffer Racing Oil:
Piston and Block are a factory 50K
Then had the following installed last year
Shoot peened,polish, and cryo'd 12V rods w/ ARP Bolts and new bearings
Billet freeze plugs
O-ringed
Hami 188-220 w/ new tappets
Ati Dampner
$7,000
D&J 6.7 side draft manifold,
Was on truck less than 2 months
Comes with hardware and machining instruction on how to cut head and bolt hole location. D&J also preps head for there manifold for $150.
New is $900, Will take $800
6.7 Complete Fuel Rail (RP/PRV/Lines)w/ Cp3 line and feed tubes (torqued once)
Can Included ATS Dual Cp3 lines and junction block for RP Sensor that go from top pump to back of rail.
$400
Airdog II 200 series, I have 2, both worked flawlessly, on truck 1 season.
Comes with base assembly/motor/filters and new lines and sump. You will need a harness and some other misc./fittings
$500 ea.
Toops EFI Conversion Kit for 03-05 Competition Style (No Dash)
Comes with everything you need:
Ecm, modified harness, fuel pedal, lower valve cover, Injector harness and Hellman performance Upper valve cover with Braided stainless vent hoses
$4000
Complete Rocker/ Push Rod setup:
All intake & exhaust rockers w/ bases and Bridges
24v Style ends (not plastic crap)
ECD Comp. Push Rods
http://ecddiesel.com/ecd-heavy-duty-pushrods.html?
$300
