Competition 12 valve motor

2

2Tone12V

New member
Joined
Jun 25, 2007
Messages
9,336
FOR SALE $25,000
Ready to drop in a truck and go.
OPEN TO PARTIAL TRADES
Motor makes big power. Runs 9's at 140+ as long as you don't suck at suspension set up's worse than me. Motor can drag race or sled pull. Adjust some timing to make it a nasty puller.
Cummins 12 valve, VIRGIN BLOCK AND HEAD w/ standard bore
Block is filled
Billet Carillo rods
Large port job on cylinder head
Fire rings in head and block
Runner Manifold
Haisley's big Inconel Valves
Billet single piece valve covers
.120 Scheid injector lines
13mm Northeast Injection pump
Scheid adjustable pump gear
Waterman fuel pump
5x.20 Dynamite Injectors
Borg Warner S475 turbo
Steed Speed Manifold
Turbosmart Wastegate
ARP 14mm main studs
625 ARP head studs 12mm
Billet Valve Cover
Billet side cover
Fluidampr comp balancer
Dual valve Spring set up
HD push rods
Electric Water pump

Call, text or email. 573-six9four-5155 or anthony@xdp.com
 

Attachments

  • 1619160_1477987399156743_6132578123346253205_n.jpg
    1619160_1477987399156743_6132578123346253205_n.jpg
    69.4 KB · Views: 0
  • 10606219_1477987412490075_3875723987826852439_n.jpg
    10606219_1477987412490075_3875723987826852439_n.jpg
    72.2 KB · Views: 0
Mahles machined by a certain transmission shop in Florida. Bowls opened up real good, cleared for valve clearance, tapered, bowls coated and skirts coated. BUMP

For $25K I'd send the twins and piping

For $20K I'll keep the twins and piping

For $15K I'll sell the long block. Only pull the pump and chargers. Sending everything from intake to steed speed. I'll leave the waterman, fuel hoses, filter, fluidampr, injectors, injector lines and electric water pump. Basically be an injection pump, intercooler (if you choose) and turbo's away from going racing.
 
Last edited:
LOL ya i'd say it would make a go kart fast. 9 second motor ready for someone.
 
Once I pull it I'll freshen up and stick it back in. Couple more weeks to go.
 
One last bump. I'll have it completely freshened up. Lower end and all if anyone is interested.
 
Just take this down so you can stay a dinosaur, all the cool people are doing it. F that tickle by wire stuff lol.
 
This would make me a good 2.5 eng for next year, just put it on Shadday's tab. Bump for ya!
 
$20,000 for a turn key ready to go motor. Intake to exhaust.... Northeast 13mm pump, the twins, the piping, waterman and all. Only thing I'll keep is the intercooler. I'll even send it with the billet flexplate thats on it.
 
You must log in or register to reply here.
Back
Top