Compound turbo best set up ??????

Status
Not open for further replies.
L

linkbelt81

New member
Joined
Apr 23, 2013
Messages
3
I have a p pumped 13mm 24 valve DTT Race tranny

Only people with actual experience please reply

Truck is built to make 1200 hp
What is the best set up to buy for Compounds?
Or make my self IE: Pick turbos ?

Thanks
:bow:
 
That's a loaded question. Kinda weird you have the mods you do and asking about turbos.

Sent from my SCH-I605 using Tapatalk 2
 
agree, your going to have to give more info.. a primary over 91mm will have plenty but if you know that your going to need the supporting parts you already know that.
for that matter you can do it with a single with a big gate with nitrous..
 
linkbelt81 said:
I have a p pumped 13mm 24 valve DTT Race tranny

Only people with actual experience please reply

Truck is built to make 1200 hp
What is the best set up to buy for Compounds?
Or make my self IE: Pick turbos ?

Thanks
:bow:
Click to expand...

Not many people here have experience with high horsepower p-pumped cummings motors. You might have better luck at DTR. Just remember, you need at least 1 psi of boost to make 10 horsepower- so you need at least 120 psi. I would shoot for 150. That's gonna need a lot of timing too.
 
kaiserbailey said:
not many people here have experience with high horsepower p-pumped cummings motors. You might have better luck at dtr. Just remember, you need at least 1 psi of boost to make 10 horsepower- so you need at least 120 psi. I would shoot for 150. That's gonna need a lot of timing too.
Click to expand...

hahaha
 
I'm building a time machine and I need to know what flux capacitor to use. Should I go with compound flux capacitors? What size?
 
Status
Not open for further replies.
Back
Top