swamp_ratt
Snootchie Bootchies
- Joined
- Jan 14, 2011
- Messages
- 281
I have a set of core injectors, cp3 and turbo in a motor I just picked up. The motor was in a truck that had a cab fire and melted all the wiring and the tops of the injectors. I'm wanting to use these maybe as a partial trade to get good injectors and cp3 to get it running. I believe the motor to be an lmm medium duty motor, but not positive. Egr cooler is mounted higher than I've seen in pickups and the upper coolant pipe comes almost straight forward. I'm also looking for lbz harness and ecm. I'd like to have a bare bones harness as I'm thinking of putting this in a jeep. Thanks!