Couple of Questions

tommyh5

tommyh5

New member
Joined
Oct 11, 2008
Messages
34
I baught an 01' 6 speed truck with a p-pump already on it. Now I don't know numbers for the pump but it came off a 98 auto truck. My truck runs fine but was topping out at 2500 RPM. I through in some 4K springs from PAC brake. Prior to changing the springs I was getting 30 PSI of boost @ 2500 RPM. Now I'm getting 25 PSI @ 3500 RPM. It has stock turbo,injectors, and delivery valves and a No. 8 fuel plate. So, do I need to play with the AFC a little to get my boost back up where it was?

Also, the truck didn't come with a fuel sutoff solenoid or wiring. I purchased the solenoiud but I'm still trying to get ahold of the wiring. I know I can make the harness I was just trying to find the factory style plug to plug into the solenoid and the relay.

thanks
 
thanks, they had the adapter I was looking for. Any ideas on where to start with the AFC? Anyone else w/ a similar setup?
 
thanks for your help, I played with the afc and got my power back.
 
That adapter that you bought, how did you wire it up to the factory harness for the truck to shut off with the 24v ignition?
 
You must log in or register to reply here.
Top