DDP comps or scheid 6x18s?

red dodge2

red dodge2

New member
Joined
Feb 12, 2008
Messages
3,803
wanting to know which one i should go with. i plan on ordering a set monday. so kind of need to decide pretty fast. the 6x18s are a little more pricey. but will they both peform the same?
 
You will be much happier with the 6x18s over the ddps, way more power to be had.
 
DDP's 24V stuff tends to run dirty and hot for the amount of power they make.
 
RonA said:
DDP's 24V stuff tends to run dirty and hot for the amount of power they make.
Click to expand...

i disagree with that, my DDP stuff has always ran very clean and very cool. when comparing my DDP 250's to Mach 7's the M7's made 10 more hp but made more smoke and heat at the same time.


and BTW my newest DDP's are SAC nozzles, and they seem to work pretty darn good. i hope to do some dyno testing on Lloyd Mill's load dyno in the next months or so
 
getblown5.9 said:
i disagree with that, my DDP stuff has always ran very clean and very cool. when comparing my DDP 250's to Mach 7's the M7's made 10 more hp but made more smoke and heat at the same time.


and BTW my newest DDP's are SAC nozzles, and they seem to work pretty darn good. i hope to do some dyno testing on Lloyd Mill's load dyno in the next months or so
Click to expand...

You are very fortunate to be able to have such good results with the DDP stuff. It is easy to get and rarely requires much of a wait. I'm not sure why your results were so different from mine. Perhaps they are being made differently now than they were when i tried a set.
 
Could be Ron, I've been dealing with DDP for about 3 years now, started with 150, then 200, then 250, and now the custom SAC nozzles for my p-pump and I've had no issues with a long wait, and the results have been very good for me.

I hope you get some new sticks for yours and put up some big numbers.
 
When did DDP start using 6 holes on 24V's they told me i could only get 7??

6x16's are bigger then ddp comps, 6x18's mite be a little to much if u plan to drive it on the street.
 
i see alot of guys running these ddp comp and they seem to perform pretty well. i think thats what im gonna get.
 
I have switched over to DDP also with amazing results in our 3.0 puller. all I can say is everyone should own a pop off tester , cause they would sh$t if they new how bad MUST of the injectors out there are. I have tested many injectors and learned alot about the ones I used to use before DDP.
 
you should at least do 6x16's or the 18's way more power outcof these then the comps,
 
You must log in or register to reply here.
Back
Top