Early 3rd Gen with CTS?

C

cj42

New England Texan
Joined
Mar 8, 2011
Messages
368
Anybody out there with an 03-04 using the edge insight CTS? I'm trying to get some info on the datalogging and do the EGt, Boost, Rail Psi, Boost and Transmission gauges work on these two yrs specifically.
What does the datalog really show? Can I record eng load, rpm, timing and rail psi?

What can you datalog and a pull? How is the software? how do you like the CTS?

thx
 
Have you called Edge? Seems like a lot of specific questions, prob be a lot faster to call them.$.02
 
I have an 2004 with the 305/555 version and I love my CTS

However, I do not do any data logging and need to download some new files and see how it works

I believe boost is limited though on the CTS, around 42psi
 
Last edited:
Edge told me this:
"The CTS will read up to 42 PSI on your truck (early 2004) because that is as high as the stock sensor reads. If you wanted to read higher temperatures you would need to add the Starter Kit, Universal 5 volt input and the 0-100PSI pressure sensor."

Here is the list of what it is capable of monitoring on the 305/555:

Accel Pedal Position
Barometric Pressure
Battery Voltage
Boost
Calculated Load
Corrected Speed
Engine Coolant Temp
Engine Speed
Fuel Level
Fuel Rail Pressure
Gear
Gear with Reverse
Intake Air Temp
Manifold Air Pressure
Mileage Coach
MPG Instant
MPG Average
Output Shaft Speed
Throttle Position
Time 0-60
Time 1/4 mile
Trans Temp
Vehicle Speed

I also, of course, added a pyro probe
 
Last edited:
You must log in or register to reply here.
Top