Factory OFV AN fitting?

[myusername]

Is there a banjo fitting that will allow me to use my factory OFV on the side of the pump and convert it to -6an line? I know the threads are m14x1.5 and can find AN banjo fittings but I'm not sure if I can use one of these fittings and replace the bolt it comes with with my OFV? Am I missing something here?

 

[camarokiller]

Why not buy an el cheap o regulator and step up to a regulated return?

 

[myusername]

I have thought about an Aeromotive setup but I am already running a fass that stays around 60-65psi. I haven't really done my research on regulated returns but I wasn't sure how that would work together and not lose the air separation from the fass.

 

[stubz616]

When I did my external regulator I used a banjo for a 9/16 carb fitting and used a different bolt from the one it came with. But it would have worked with the factory OFV too.


Sent from my iPhone using Tapatalk

 

[shortbusdriver]

http://www.ebay.com/itm/14mm-x-1-5-to-6AN-Turbocharger-Water-Banjo-Bolt-Fitting-Kit-/281779831142?_trksid=p2141725.m3641.l6368