fully built puller 96 dodge 2500 ext cab long bed

F

Fine Finish

New member
Joined
Aug 5, 2008
Messages
229
Fully built puller, very well put together, it looks real nice, paint is about 2 years old, ive hooked it about 10 times. I took it on a partial trade for another truck I had. Heres what its got:
Short block has about 18 hooks on it
mahle big bowl pistons, standard bore
arp head studs, rod bolt, and main studs, girdled
balanced rotating assembly
o-ringed head, ported and polished, plenum style intake
spearco intercooler
pdi exhaust manifold
dual feed injectors built by weston s
cds 13mm pump w/ quick fill cam
.120 stainless fuel lines
4.88 gears
electric fans
fluidamper
data logger
1410 front shafts and yokes
1480 one piese rear shaft & yokes from haisleys
welded front axle w/ posi lock front axle disconnect
hts full billet auto w/ suncoast manual valve body, 1 hook on new trans
new ats 5 star converter w/ ats billet flywheel, lock up switch
cheetah floor shifter
scs axles and spool
241 dhd
brand new 35/12.50/18 sts's on 18x12 pacer wheels
has 2 hoods, one set up for a hood stack and one is just a regular
brand new 7" stack in bed
traction bars
built hitch
there will be 3 turbos that come w/ it, s480 (3.0), s475 (2.8), s480 custom 2.6 charger w/ stepped race cover brand new no hooks
I think thats it for now, ill have pics for ya tomorrow, I am taking in to schied and will be pulling in the 2.6 class. So it can be seen there as well.
 
$19k, the 3 turbos alone are worth about $3500. this is what it looked like when i got it, like i said i changed a few things around. Theres a video of the first hook i ever made of it on youtube, this was how i found out the trany was junk. It now spins out in the end. Look up Dcorey79, then it will be under Jeff kline fine finish concrete, highland illinois. O ya, in the video youll see the waste gate open up and dump boost, i pulled that waste gate off. I think think the trucks is probly more set up for 2.8
 

Attachments

  • the new one 2.jpg
    the new one 2.jpg
    10.5 KB · Views: 0
  • the new one.jpg
    the new one.jpg
    9.9 KB · Views: 0
Last edited:
Got that covered guys, the 2.6 does perture, legal truck for schied, as long as the trans blanket arrives on tiime. Right now these are the only pics ive got, i will take more and have them on here as soon as i can
 
this truck from bowling green ohio. mr. smith? looks like same truck and mods...
 
Truck has Mahle 286110 pistons, I redid the injectors, they were originally from JL Machine, 5x0.018" dual fed with 0.015" lift set to 280BAR.
 
I also think the truck is set up to be a dually in the rear if i recall mike changed it over to a dually but never ran duals before he sold it
 
sorry guys i was at the lake this weekend. yes dually rear end, and look on youtube under scott barcus, king city for a video from a while back.
 
You must log in or register to reply here.
Top