Getting Nozzles Flow Tested

bh10

bh10

Web Wrencher
Joined
Feb 14, 2008
Messages
1,974
Where's a good place to get nozzles flow tested, I just bought some nozzles and want to get them checked out.
 
Exergy Engineering

$80 to flow test them
$120 to flow and even them out

At least that was the price for 12v nozzles.
 
Diesel Injection Service Company Inc in Louisville, KY. They use a fancy nozzle-only tester that's a modded bench built by their Master Calibrating Company division. That's the company started by the DIS founder that builds and sells the master calibration pumps and injectors fuel shops buy to make sure their equipment all talk the same language nationwide. Trick stuff. They have an Extrude Hone machine next to it and can use it to match your nozzles if you want. Also they can flow your assembled bodies of course.

Smartest move would be to give them the assembled injectors and have them pop test before spending a lot of time $$ on them. A % of injectors fail pop testing (spray pattern or leaking) yet will pass flow testing. Result is bad.

Claude Turner at 502-361-1181
 
nozzle testing is only half of the story, they should be flow matched on bodies.
 
Flowmeister said:
Diesel Injection Service Company Inc in Louisville, KY. They use a fancy nozzle-only tester that's a modded bench built by their Master Calibrating Company division. That's the company started by the DIS founder that builds and sells the master calibration pumps and injectors fuel shops buy to make sure their equipment all talk the same language nationwide. Trick stuff. They have an Extrude Hone machine next to it and can use it to match your nozzles if you want. Also they can flow your assembled bodies of course.

Smartest move would be to give them the assembled injectors and have them pop test before spending a lot of time $$ on them. A % of injectors fail pop testing (spray pattern or leaking) yet will pass flow testing. Result is bad.

Claude Turner at 502-361-1181
Click to expand...
Really so what Pop PSI do you (your company) like to run on CR injectors?
 
what exactly does a buzz test do can it tell you what injectors or not working
 
You must log in or register to reply here.
Top