Good price for a BHT3B equivalent turbo?

[Big Blue24]

I saw this ebay listing and it looks like a pretty good price. What do you all think? I have no idea what size compressor or how many pounds per minute this turbo can flow but ought to make a great 500-600 hp twin setup!!


http://cgi.ebay.com/ebaymotors/Turbo-for-cummins-855-p-n-167713-BHT3B-3803108RX_W0QQcmdZViewItemQQ_trkparmsZ65Q3a10Q7c66Q3a2Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a6Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem414673447dQQitemZ280354833533QQptZOtherQ5fVehicleQ5fParts

 

[Muddin_dude06]

I think it has a 32cm exhaust housing. But other than that it should be a 74mm inducer. Could be in a set up 500-700hp depending on the secondary.

 

[MAXTORQ]

BHT3B's spool great on the bottom but loose out on top compared to the regular HT3B . They work well when matched with a s300 or 35/40.

 

[jessmeistertc]

BHT3B's spool great on the bottom but loose out on top compared to the regular HT3B . They work well when matched with a s300 or 35/40.

whats the difference between the BHT3B and the HT3B?

 

[Big Blue24]

"B" has a map width enhancement groove that helps reduce surge by widening the compressor map. Essentially, a groove is cut into the compressor housing that bleeds off some of the incoming air. This groove bleeds slightly compressed air to the area located under the silencer ring on a stock HX35 or He351, 341 etc.


Pictured is a HX35/40 hybrid with 60mm compressor wheel. There is not a silencer ring so you can see the area where the air bleeds to. The map width enhancement ring is cut about .25" below the leading edges of the compressor wheel.

 

[MAXTORQ]

whats the difference between the BHT3B and the HT3B?

The BHT3B has a divided exhaust housing. Where as the HT does not.

 

[SWALLDOG]

The BHT3B has a divided exhaust housing. Where as the HT does not.

Mine (BHT3B) does not have a divided exhaust housing.

 

[Muddin_dude06]

My HT3B has a divided entry 32cm on it...

I was always under the impression the BHT3B and HT3B were identical but one was Holset and the other was Garrett I think??

 

[olddodgetruck]

mine is a bht3b with a undivided 26cm housing i also heard that a bht3b has a 76mm compressor where a regular ht3b has a 74mm anyone elsa hear this?

 

[oldsmokey]

Mine is undivided as well. The garretts are GT3Bs. The only difference that i have ever heard of is the same as Big Blue posted

 

[OT-OF-Here]

BHT3B

I saw one very reasonably priced over on City Diesels site.