Hi guys,
As title states need help identifying what side-draft intake is intended for a milled cylinder head I have.
Unfortunately don't have details on who milled the shelf off or anything which is the reason for my post.
Worst case scenario I'll take the head to my local water-jet guy and just have him make me a flange to fab from but before going that route figured I'd see if anyone here knew what flange or intake would fit this?
DETAILS: Head is for a 5.9L CR. All the bolts appear to be spaced at roughly 4.75” from center to center horizontally with the exception of the lower bolt toward front of the head.
SEE PICS BELOW... Thanks!
As title states need help identifying what side-draft intake is intended for a milled cylinder head I have.
Unfortunately don't have details on who milled the shelf off or anything which is the reason for my post.
Worst case scenario I'll take the head to my local water-jet guy and just have him make me a flange to fab from but before going that route figured I'd see if anyone here knew what flange or intake would fit this?
DETAILS: Head is for a 5.9L CR. All the bolts appear to be spaced at roughly 4.75” from center to center horizontally with the exception of the lower bolt toward front of the head.
SEE PICS BELOW... Thanks!
Last edited: