HPOP Gauge

[midnight2004]

I bought a used HPOP Gauge and it came with no instructions and I was wondering where and what wire do I tap into? Also what kind of pressure should I be looking for? Does it vary from idle to throttle?
Thanks

 

[outlaw6oh]

mine came with a plug that goes into the icp sensor without cutting wires, you should see 4000psi at wot, and if I remember correct somewhere around 600 at idle(can't remember of the top of my head). If it's a Isspro gauge get a hold of MICHAEL on here that is his screen name on here, he can get you all the wiring stuff you'd need.

 

[Redneck6.0L]

if your using erics extreme race file, the gauge will not read correctly,

 

[outlaw6oh]

if your using erics extreme race file, the gauge will not read correctly,

why wouldn't it work right:what:, mine seems to read fine of course I wouldn't know whats right anyway:hehe:, but it does seem to read the same no matter what tunes I run including my tow tune I downloaded from Spartan.

And mine reads 1000psi at idle in gear and 4000 at full throttle and varies inbetween, but somewhere around half throttle it runs to 4000psi.