Injector washer info please

[cummins724]

I dont think they could do it to my twinsLOL

I thought you were running a 62/71? Sorry.

 

[Rollin Coal]

threw the injectors in today. Yes, they haze, but not much.

I did VERY limited testing because my breathers were puking oil. going to need to do something else for that.

Anyway.

today it was cold. around 25*, ADR3K tune, 4th gear pulls, smoke being out of 10 at full boost.

This is what I was making on the drive there with the 8 hole 250's

pl02 35psi 1400 egt smoke 0
pl06 55 psi 1600 egt smoke 3
pl08 58psi 1600+ egt smoke 5

And on the way back with the 7x.018's

pl00 42psi 1200 egt smoke 1
pl02 50psi 1300 egt smoke 1-2

 

[01CumminsSport]

when you did the tests did you just put foot to the floor or ease into it,

 

[Rollin Coal]

i punched it from 1800rpm. thats the sweet spot with my s400

 

[01CumminsSport]

damn i need a smaller charger, if i do that it hits at 27-2800 then it blows the tires away

 

[Rollin Coal]

yeah, i put this charger on my truck for some added lag (aka, traction). Finally now with the tail gate on, battery 16gal fuel cell, and tank for the water/air intercooler i can USUALLY keep the tires planted in 4th gear.

 

[blkram]

Glade the sticks worked out for ya, I shoulda ran em:hehe::Cheer:

 

[Rollin Coal]

I thought you were going with some 6 holes.

 

[blkram]

I thought you were going with some 6 holes.

:hehe: shhhhhhhhh

 

[Warpig]

I did VERY limited testing because my breathers were puking oil. going to need to do something else for that.

I have a brand new 12v tappet cover if you are interested. You'll just have to figure out how to mount the ecm.

 

[RonA]

I don't like to do anything larger than a 7x0.012" for street use in a VCO, too many incidents of tips failing. I am working on something else, for someone down South, that likes to go fast.

Yep. Bigger isn't always better. My 7X.0115's made 882 with twins.

 

[Rollin Coal]

I have a brand new 12v tappet cover if you are interested. You'll just have to figure out how to mount the ecm.

Can you change the cover with out pulling the pump?

 

[Warpig]

Can you change the cover with out pulling the pump?

I'm not sure, but I believe you have to, you will have to take a look. Adding the 12v cover should solve your blowby issues though.

 

[Rollin Coal]

I'm not sure, but I believe you have to, you will have to take a look. Adding the 12v cover should solve your blowby issues though.

Im pretty sure the pump has to come off. Maybe I will do it when I put the cam in. Now I just need another valve cover, got one of them LOL?