DieselAdict
If I Had The $ I Would...
- Joined
- Apr 8, 2015
- Messages
- 31
Bought a K31 for cheap a while back and was just going to flip it but decided to fool around. I know that the ATS A5000 has some t3 housing on it. Wish I had one to look at. I was also reading in older posts that II used to sell machined s400 housings to fit the k31. It got me thinking to try one my self. I purchased a 83/74 S400 .80 housing and started comparing. So after a hours on the lathe and lot of measuring I got it. So with a now k31/s400 hybrid, putting it on the truck is now in process. Gonna run it for a week or two just to play around. I know it isn't the best bet for a 12 valve. Seeing how to its a 71/76/.80 it might be better than I expect. Truck is as described in my signature except an exhaust manifold. Gonna take forever to spool but a rocket ship when it lights. Any one have any thoughts. Might dyno it at scheids in 2 weeks if I get all the parts in time. I will let every one know how it turns out.