looking for some HE351 parts

[Signal 73]

for 04.5 turbo, Looking for compressor housing snap ring, Exhaust housing to center section V band clamp, exhaust housing outlet to cast elbow vband clamp, and a exhaust wheel in good shape.

Thanks, Jim

 

[duck_04]

Probably be better off to buy a good used complete turbo

 

[Signal 73]

Probably be better off to buy a good used complete turbo

probably right lol, but I didnt know maybe a turbo builder or someone has a box of parts hangin around trying to get 2 turbos put back together againop:

 

[Mark Nixon]

Jim,
I have the snap ring and both clamps.

1 of 3 choices on the turbine:

Good used (good luck!)

Buy NEW, go here; Dodge Ram 5.9L Cummins Diesel Turbocharger Holset 4043600 Turbine Wheel Shaft | eBay

Or you can POSSIBLY bore out the exhaust housing and use a turbine from an H1C, which also requires a small amount of grinding where the nut seats on the compressor wheel.
This is to compensate for the H1C's slightly shorter shaft on the compressor side.

Mark.

 

[Signal 73]

Mark thanks, great info! sending you a pm about other parts.