jhastings
New member
- Joined
- May 26, 2011
- Messages
- 129
Updated as of 30 DEC 17:
All parts removed from either a 98' 12v or 94' 12v
Bigger items:
-HX-35 w/ 14cm WG housing Banks Big Head actuator $400
-WH1C turbo with 12cm WG housing $100
-Timing Cover Housing (KDP jig installed) $75
-Timing housing cover $40
-Fan with fan clutch $200
-P7100 Injection pump gear $90
-Stock valve springs $10
-Cam Gear $100
-6x valve covers (1 with oil filler) $100
-AC compressor $25
-Tappet Cover $40
Smaller Items:
-P7100 Injection pump to block mount $40
-Stock fuel heater assembly $30
-Random Hard Fuel lines $10/each
-Canister style fuel filter housing and water in fuel sensor $30
-Turbo drain pipe $20
-Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there)
-12v full set of used stock tappets (1 needs resurface) $15
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $30
-Oil pan oil pickup rear sump $25
-Fan pulley and fan hub $25
-Rear main seal housing $25
-Cam retainer plate $35
-Rear lifting ring bracket $10
-Stock 98 12v clutch hydraulics (worked well when removed) $20
-6x12v injector hold down nuts $20
-Stock used tensioner $5
-Rigid AFC to Wastegate line $5
-Cold pipe clamp $5
-v-Band clamp $10
-Oil pump $20
-Battery hold down bolts $5
-Oil fillers with cap $10
If you see something in the pics not listed, let me know.
All prices are firm unless you combine items then its OBO!
Please text me at (805)610-9254 as it is tougher for me to answer PM's
All payments PayPal to jameshhastings@gmail.com
Shipping is mostly through USPS as cheap as possible. Thanks!
All parts removed from either a 98' 12v or 94' 12v
Bigger items:
-HX-35 w/ 14cm WG housing Banks Big Head actuator $400
-WH1C turbo with 12cm WG housing $100
-Timing Cover Housing (KDP jig installed) $75
-Timing housing cover $40
-Fan with fan clutch $200
-P7100 Injection pump gear $90
-Stock valve springs $10
-Cam Gear $100
-6x valve covers (1 with oil filler) $100
-AC compressor $25
-Tappet Cover $40
Smaller Items:
-P7100 Injection pump to block mount $40
-Stock fuel heater assembly $30
-Random Hard Fuel lines $10/each
-Canister style fuel filter housing and water in fuel sensor $30
-Turbo drain pipe $20
-Intake runner plate and grid heater housing with IAT sensor $30 (GRIDS INOP due to broken stud, otherwise all parts there)
-12v full set of used stock tappets (1 needs resurface) $15
-Stock lifter rods $30
-6x Rocker pedestals and rocker arms $100
-2x 12v stock exhaust manifolds tapped for probes $40 each
-Both hard heater lines $30
-Oil pan oil pickup rear sump $25
-Fan pulley and fan hub $25
-Rear main seal housing $25
-Cam retainer plate $35
-Rear lifting ring bracket $10
-Stock 98 12v clutch hydraulics (worked well when removed) $20
-6x12v injector hold down nuts $20
-Stock used tensioner $5
-Rigid AFC to Wastegate line $5
-Cold pipe clamp $5
-v-Band clamp $10
-Oil pump $20
-Battery hold down bolts $5
-Oil fillers with cap $10
If you see something in the pics not listed, let me know.
All prices are firm unless you combine items then its OBO!
Please text me at (805)610-9254 as it is tougher for me to answer PM's
All payments PayPal to jameshhastings@gmail.com
Shipping is mostly through USPS as cheap as possible. Thanks!
