Pullin' Out
last minute pro
- Joined
- Dec 12, 2009
- Messages
- 176
I turned an 01 manual into a dedicated 12v puller. Cleaning shop. I am located in western Missouri. Pictures can be sent if requested. Thanks
Stock standard bore 12v pistons. good condition. $110 shiped
Stock 12v cam with numbered lifters. No pits. lobes well within spec. $110 shiped
5 12v injectors. Good cores, may perform fine but no gurantee. $110 shiped
Stock intercooler out of the 01. I pressure tested at 50lbs. no leaks. $110 shiped
PCM out of the 01 6 speed. $110 shiped
Alternator off 12v worked fine when removed in november. $110 shiped
3/4 ton leaf springs with frame mounts $100 not going to ship
AC condenser $110 shiped
2 AC compressors $40 each shiped. Canister can be included if needed
2 guage clusters. One is out of a 95 12v manual. The other is out of the 01 manual. $60 shiped
ABS moduel out of the 01. $60 shiped
Welded 3.55 Carrier out of a dana 80. $60 shiped
Stock standard bore 12v pistons. good condition. $110 shiped
Stock 12v cam with numbered lifters. No pits. lobes well within spec. $110 shiped
5 12v injectors. Good cores, may perform fine but no gurantee. $110 shiped
Stock intercooler out of the 01. I pressure tested at 50lbs. no leaks. $110 shiped
PCM out of the 01 6 speed. $110 shiped
Alternator off 12v worked fine when removed in november. $110 shiped
3/4 ton leaf springs with frame mounts $100 not going to ship
AC condenser $110 shiped
2 AC compressors $40 each shiped. Canister can be included if needed
2 guage clusters. One is out of a 95 12v manual. The other is out of the 01 manual. $60 shiped
ABS moduel out of the 01. $60 shiped
Welded 3.55 Carrier out of a dana 80. $60 shiped
Last edited: