milling a cumbustion chamber in a 24v head?

[nicks05]

nice pics jimmy on the 12ver. looks to be some good work.

 

[nicks05]

ok here's a few shots.

 

[nicks05]

few more of the porting

 

[Kronic_187]

and that thing is still going to seal on the block ?

 

[not enoughsmoke]

why not run a deckplate?

 

[DEEZELRAM114]

why not run a deckplate?

That will change pushrod length n lift the injector out of the hole

 

[zstroken]

Interesting, I would be scared of the cracking, as the 24V heads are known for cracks in the seat and injector hole area to begin with.

 

[GOT-Torque]

Interesting, I would be scared of the cracking, as the 24V heads are known for cracks in the seat and injector hole area to begin with.

same here...

I've seen this done before and cracking was more of a problem after the material was removed.

 

[LReiff]

Interesting, I would be scared of the cracking, as the 24V heads are known for cracks in the seat and injector hole area to begin with.

This was also my thought. Definitely not a good idea where valve seats are present.

 

[XLR8R]

Looks neat but likely a dead-end street... better to cure the problem instead of treating the symptom. $.02