Mixed 1stgen and 2ndgen parts, engine, ect.....

this is the piston with the worst scuffing on the skirt, barely noticibale with your fingernail, others are all a bit less.

tops of the pistons look all gummed up because I coated the engine with moly grease while it was sitting with the head off, they will clean up normal.

[ame="http://s630.photobucket.com/user/ahale2772/media/FF605EF4-A698-492A-A048-465D3D1E3177-615-00000031CEF89A3D_zps0b7d9d87.jpg.html"]FF605EF4-A698-492A-A048-465D3D1E3177-615-00000031CEF89A3D_zps0b7d9d87.jpg Photo by ahale2772 | Photobucket[/ame]
 
UPDATED LIST (ask me if you do not see parts listed, I have tons of parts)

stock 1stgen manifold, drilled for pyro, 25$
non intercooled boost crossover, with grid heater 40$
complete 1stgen head, non-IC, 60$, needs rebuild but good casting.
1stgen intake plate 25$
1stgen non-IC water inlet 20$


1 set of injector hold downs, 10$
1stgen injector return line-10$
full set of 1stgen injector clamps-20$
1stgen Non IC injector lines- 50$
intercooler 1stgen 40$
non IC pistons with pins, skirts have very little scuffing 120$
VP44 gear 50$
BLUE CHIP vp44, had flat pedal, selling as core 150$
vp44 timing case 80$
P-Pump-24V intake spacer with bolts 40$
Cam gear 60$
VE front case 70$
VE front cover 20$
VE pump gear 50$
12V oil cooler and filter housing 80$
ATF/coolant heat exchanger with bracket 30$
727 automatic valvebody-30$
H1C turbo off of non IC cummins, 90* elbow welded on cover 50$
set of pushrods 40$
2ndgen dodge valve cover plate, 30$
1stgen engine mounts, no rubber, set 50$
1stgen high-idle 50$
1stgen 5speed shifter boot with floor mount 40$
2ndgen floor shifter boot, 5 speed 20$

2ndgen dodge stock front 4 link bars 60$ for all 4
good 1stgen core support, non intercooled. 100$
set of valve covers-60$
1995 dodge engine bay wirring harness for a standard trans truck, with computer
industrial app water inlet 100$
1stgen block plate 50$
1stgen kickdown cable 30$
#5 FUEL PLATE 50$

rocker arms cut for ARP studs, 75$ with an exchange set, 125$ outright

47re/47RH flexplate insert, 100$
[ame="http://s630.photobucket.com/user/ahale2772/media/4869EDDB-2D6C-46D3-A680-3AA6C94215EC-801-00000043C79571F8_zps44fab586.jpg.html"]4869EDDB-2D6C-46D3-A680-3AA6C94215EC-801-00000043C79571F8_zps44fab586.jpg Photo by ahale2772 | Photobucket[/ame]
 
Last edited:
any one know why the normal way of posting pics from Photobucket isnt working?
 
sorry to keep bumping this, more parts..

balancers 50$ a piece, have 2 smaller 1stgen ones and 4 larger 2ndgen ones.
12V/24V fan hub bracket 50$
12V intake horn 40$
industrial (head mount) fan hub 60$
industrial style front engine mount, mounts below the balancer, 80$ a piece with bolts
hx35 from a bus, normal play, no in/out, pretty rotted exh housing 100$
Vacume pump/PS pump assembly worked fine when it came off 100$
 
Not much on 5speed stuff, pm me if you want a high idle setup

12valvedriver, i have a few sets of core non ic injectors, 50$ shipped firm
 
You must log in or register to reply here.
Back
Top