Need help with 1500

H

HIGH TECH RAM

Haters!
Joined
Jul 24, 2007
Messages
2,857
I have a 99 1500 non diesel but hopefully you guys could help me cause my truck is stuck in 10" of snow write now. My vacum lines to the axel were diconnected for a while and I plugged it in to get the front hubs too engage and nothing. There is air coming out of them but for some reason it will not engage the axel. I know this is not a diesel but I figured one of you guys would know how to fix my problem hopefully!! Any suggestions would be great!!!!
 
There is air coming out of what? There should be no air coming out of the lines. It's vaccuum.
Good chance you have ice inside the diaphram since it was open. May (gently) try gently heating it (gently) with a torch. Did I say gently? :poke:
 
Alot emphasis on Gently. I try a heat gun before a torch. If you good you could do with hurting something. But I know I wouldn't trust myself using a torch.
 
I was thinking one of those little green-bottle cigarette lighter torches..
But yes, gently. Heat gun would be better if you can get a cord out to it.
 
It was frozen I guess I put a couple drops of alcohol in the diaprm heated it with a torch and boom hubs locked Thanks guys
 
You must log in or register to reply here.
Back
Top