00 black ram
Cummin's Enthusiast
- Joined
- Nov 8, 2007
- Messages
- 1,105
I have searched on here and found info for trucks with 4.10's, but not 3.55's. I have a 2000 6spd with a D80 rear and 60 front, both are open. I want to know what some of you have tried and works. I had seen where one guy said he used a Detroit Locker for 4.10's, just drilled the holes out to except the 3.55's ring gear bolts. But when I talked to a tech at Randy's Ring and Pinion he said that there was no difference in the bolts, it is the deck height that the ring gear sets on. I would appreciate any info that you guys have.