bd blk 12v
Fixen broken bulldogs
- Joined
- Sep 10, 2008
- Messages
- 241
Hello guys I have a 2001 24v with 259k. it's my first 24v and a pretty clean one at that. It does have an issue. It's hard to start when warm. I believe it's the pump. I have pulled all the connector tubes and replaced o rings. I have replaced injectors, had a new set sitting. I have pulled all seal washers and replaced them. The fuel return on back of the head was brittle on the rings. The truck will start cold but let it run to operating temp and shut it off will not start. It has a new lift pump and electric sender on the filter housing. Bump the key to start pump runs builds 5-15 psi. When it's running never drops 15psi. It idles smooth and has plenty of power. It does seem odd it won't start hot. I hate to spend a good deal of money on a pump if it's not the issue. Thanks for the help