Legendarydslper
New member
- Joined
- Nov 18, 2008
- Messages
- 1,840
All prices are "Or best offer" and plus shipping. Located in Three Rivers Mi.
(2 Sets) R&R Cummins Rods, with vented cap option $2600 per set
(1 Set) Exergy 6.7 80% over injectors with 3k Miles $2800 plus Cores
(1) Borg Warner S363/68/14wg brand new $1300
(1) Box Unit S366 with hose cover, billet wheel, 360 thrust, hx40 outlet. NEW $1175
(1) NEW Stainless Diesel T6 24v exhaust manifold polished old style $800
(1) B&B 3.5 Side Draft Intake New $1200
(1) Fresh 5.9 common rail head, as ported as it goes without cutting the manifold off, bolt in freeze plugs, tool steel retainers/keepers, 110lb springs, oversized valve seats. $2000 or best offer with core.
(1) FRESH Full billet 47re- TCS Input/Intermediate/Output, TCS Steel Drum/Aluminum Piston, Intermediate servo, 4 ring accumulator, reverse servo and pin, Band anchor and strut, LDP built Valve body, Mag Hytec Pan, Bolt in Roller sprag, DPC 2200 Stall Billet Triple Disk Converter, Alto Red cut Clutches/Black steels, BD Black Flexplate...I am sure I am missing something $6500.
(1) P-pumped 24v Engine (180k miles on short block) (30miles on mods)
-13mm DPE Pump (Stock Cam)
-Colt Big Stick Cam
-Colt Lifters
-Fresh oringed cylinder head
-Fresh Top end Gaskets
- 6x.016 SAC Injectors by DFI
-Haisley .093 Cross Tubes
-Schied .093 Mild Steel P-pump Lines
-Steed Speed t4 Manifold
-Billet S472/83/.90 Turbo
-ARP 425 Head studs
-Hamilton Valve Springs
-Trend Performance Push Rods
-All new Gaskets throughout
-No blow by, or wear seen on cylinder walls. Can inspect bearings with deposit.
Asking $6500 or best offer. Can hear run before pulled.
(1 Set) Moto Metal 962 Chrome 20x10s with literally 40 miles on them with Dynapro ATM Tires. $1500
Thanks!!
(2 Sets) R&R Cummins Rods, with vented cap option $2600 per set
(1 Set) Exergy 6.7 80% over injectors with 3k Miles $2800 plus Cores
(1) Borg Warner S363/68/14wg brand new $1300
(1) Box Unit S366 with hose cover, billet wheel, 360 thrust, hx40 outlet. NEW $1175
(1) NEW Stainless Diesel T6 24v exhaust manifold polished old style $800
(1) B&B 3.5 Side Draft Intake New $1200
(1) Fresh 5.9 common rail head, as ported as it goes without cutting the manifold off, bolt in freeze plugs, tool steel retainers/keepers, 110lb springs, oversized valve seats. $2000 or best offer with core.
(1) FRESH Full billet 47re- TCS Input/Intermediate/Output, TCS Steel Drum/Aluminum Piston, Intermediate servo, 4 ring accumulator, reverse servo and pin, Band anchor and strut, LDP built Valve body, Mag Hytec Pan, Bolt in Roller sprag, DPC 2200 Stall Billet Triple Disk Converter, Alto Red cut Clutches/Black steels, BD Black Flexplate...I am sure I am missing something $6500.
(1) P-pumped 24v Engine (180k miles on short block) (30miles on mods)
-13mm DPE Pump (Stock Cam)
-Colt Big Stick Cam
-Colt Lifters
-Fresh oringed cylinder head
-Fresh Top end Gaskets
- 6x.016 SAC Injectors by DFI
-Haisley .093 Cross Tubes
-Schied .093 Mild Steel P-pump Lines
-Steed Speed t4 Manifold
-Billet S472/83/.90 Turbo
-ARP 425 Head studs
-Hamilton Valve Springs
-Trend Performance Push Rods
-All new Gaskets throughout
-No blow by, or wear seen on cylinder walls. Can inspect bearings with deposit.
Asking $6500 or best offer. Can hear run before pulled.
(1 Set) Moto Metal 962 Chrome 20x10s with literally 40 miles on them with Dynapro ATM Tires. $1500
Thanks!!
