roachie
Taco Master
- Joined
- Nov 2, 2007
- Messages
- 11,133
This is for a conversion on a ford. The truck is an 04 and had a 5R110(?) with an electric shift NV273 case.
I'm installing a NV5600 and have to change the input on the case to match the NV's output. I counted 29 splines on the output.
I'm finding both 29 and 31 spline inputs for the 271 and 273, not sure why or if they are the same part. But the same spline count for both cases lists differing part numbers.
Also read online that the bearing diameter of the Ford vs. Dodge is different, the cases clock different, and attach differently.
Any help?
Here is where I'm looking:
http://www.drivetrain.com/parts_catalog/transfer_case_replacements_and_parts/np273.html
I'm installing a NV5600 and have to change the input on the case to match the NV's output. I counted 29 splines on the output.
I'm finding both 29 and 31 spline inputs for the 271 and 273, not sure why or if they are the same part. But the same spline count for both cases lists differing part numbers.
Also read online that the bearing diameter of the Ford vs. Dodge is different, the cases clock different, and attach differently.
Any help?
Here is where I'm looking:
http://www.drivetrain.com/parts_catalog/transfer_case_replacements_and_parts/np273.html