nv4500 and t-case for 1st gen

RAMICATOR

They Call Me Boner
Joined
Jun 26, 2006
Messages
448
are there any transfer cases that will bolt up to the nv4500 that have a passenger side drop?

id like to swap in the nv and a different t-case with a better low range for sled pulling, since i already have a DD clutch and can get the trans from a buddy. thanks

tony
 
The only thing that will bolt in is a 1st gen 205 from a 5 spd. You will have to turn down the O.D. of the coupler, or just pull the rear seal in the NV4500.

If you don't mind a little fab work you can put in a 271.

IMG_3713.jpg


ntc3.jpg
 
Top