kawi600
got Coal for Christmas
- Joined
- Jun 9, 2008
- Messages
- 865
just installed twins so this guy has got to go.
Got what I think was a 62/65/12 phat shaft turbo. found this was a great turbo for mild street and tow in the 400hp range on a 2nd gen. spooled even better with aftermarket manifold.
It has the usual small amount of side to side play and zero in and out play on the shaft.
the actuator has a dent in the top from the shock tower but I tested it with compressed air and it moves a full stroke and does not leak air.
also have an OEM oil pan and exhaust manifold.. and the 4" stainless downpipe I had with it if theres any interest in that.
Will try to get some pics if theres any interest
located in Boston, MA
Got what I think was a 62/65/12 phat shaft turbo. found this was a great turbo for mild street and tow in the 400hp range on a 2nd gen. spooled even better with aftermarket manifold.
It has the usual small amount of side to side play and zero in and out play on the shaft.
the actuator has a dent in the top from the shock tower but I tested it with compressed air and it moves a full stroke and does not leak air.
also have an OEM oil pan and exhaust manifold.. and the 4" stainless downpipe I had with it if theres any interest in that.
Will try to get some pics if theres any interest
located in Boston, MA
Last edited: